Posted on

Regenerative Acceleration Generator

Today, I am going to explain you about a specialized Generator Model, which can be fixed to an Electric Vehicle by which we are given a good opportunity to recharge the Vehicle Battery , while giving an acceleration to the vehicle speed. This is a new invention of Mr. Thane Heins from Canada and now the Scientists are involved in continuous experiments to fix this Generator to the Electric Vehicles and start commercialized mass production of such Electric Vehicles for which very less recharge plugins are required when running the car.     

I would like to do a little explanation about a special and awesome effect of the Electromagnetism to the concerned persons who have a keen intellect about the mechanical field.  When we use a Conventional Generator Coil consisting few turns of copper wire with a Magnet Rotor spinning in front of it, the Rotor speed will get decreased when the Generator Coil is connected to a Load. This is called the Lenz law and this Lenz Law consists of two brakes and that is why the Magnet Rotor speed gets decreased. I will explain how it happens. When the N pole of the rotor magnet approaches the Core of the Generator Coil , the coil becomes magnetized as the coil is connected to the load and there is a loop circuit with a resistance caused by the load.

In this diagram , I will explain how the Lenz Law causes 2 brakes and thus decreases the RPM of the Magnet Rotor, when the Conventional Generator coil is connected to the Load.

When the N pole Rotor Magnet glued to the Rotor approaches the Coil Core , the Coil is very quickly magnetized , before the Rotor Magnet reaches the Top Dead Centre ( hereafter mentioned as TDC) . So then the Coil Core will also become a N pole magnet which resists and repels the rotor magnet which is also the N pole magnet and still approaching the coil core.  . So this is the First break of the Lenz Law. It is caused by Magnet Repulsion.

Then when the Rotor Magnet passes the Coil Core , the Coil is demagnetized and reverses the current induced in it, so  then the coil core become a “ S”  pole Magnet and it attracts the passing “N” pole magnet of the Magnet Rotor . So this is the second break of the Lenz Law. This is how the Lenz Law decreases the Rotor RPM when the Generator coil  is connected to the Load.

So now I am going to explain you, how the Lenz law becomes much delayed and how the Rotor RPM increases when we use the Special  Regenerative Acceleration  Coil ( hereafter mentioned as Regenx Coil ).

In this Regenerative Acceleration Effect there are two Parameters .

  1. The Coil should have many turns of copper wire and it should be high impedance , high resistance coil.
  2. The Rotor RPM should be high .

The following is the Coil I made which has over 8000 turns of Guage 28 copper wire and it is about 600 Grams in weight.

But when I was experimenting with my Small Set up , I understood that there should not be a very high speed in the Rotor and if we can make the coil a high resistance one then the  rotor RPM does not play any significant role in making the effect .

My coil is a Bifilar coil and I connected the Bifilar coils in series and it has a high resistance. I used a small motor discarded from a DVD player and it is a 5V motor . When I supplied the power my magnet rotor gets about 1800 RPM and it is not too high , but I successfully achieved this effect.

So this is how the Regenerative Acceleration Effect happens.

As there are too many coil turns and the rotor is spinning in a very high speed, the Regenex Coil is not magnetized very quickly when the N pole rotor magnet approaches the Coil Core. But this Regenx coil gets magnetized when the N pole rotor magnet has just passed  the TDC as shown in the following diagram.

So as you can see in this configuration the Regenx coil is magnetized for “N “ pole  , when the rotor magnet has just passed  the TDC , so that there is a repulsion in the Magnets and the rotor magnet is pushed away by the coil core (Because it is a N pole Magnet )and this is the first Acceleration effect of this regenerative acceleration effect.

As the rotor is in the  N S N  S magnet configuration , then this coil core simultaneously attracts the  next S pole rotor magnet and it is the second acceleration effect.

Actually the Lenz law is happening here , But it gets much delayed because of the new alterations and accelerates the Magnet Rotor  when connected to the load.

I also 100 percent agree with you that, we can’t add too many heavy loads to this regenex coils , but we can charge some heavy duty batteries like 12V 7A or 12V Car batteries , if we can sue some big magnets with big copper coils like Guage 20 copper wire because they will provide much ampere.

In my small set up , I have used Guage 28 thin copper wire , but I can charge my mobile phone battery and also I can lit my lampshade and the RPM of the Magnet Rotor increases well and the current which motor takes from the drive battery gets much decreased when I connected the load.

I have also well understood that, if we can add more regenex coils with loads the rotor RPM increases simultaneously . For me this is a very amazing phenomena and as my first small set up worked very well , I am going to make a much bigger design .

Please note that it has been experimentally proved that , if we add more regenex coils, the RPM of the Rotor increases simultaneously, and the prime mover takes much less current from the drive battery . It is marvelous fact and this will direct me to provide many overunity motors and we have reached this overunity situation 90 percent now.

A video of my first original small setup can be seen using the following link

I am going to optimize this design and make a bigger scale . I am in the process of that work and whenever I get the satisfactory results , I will share all the information with you.

I hope you will reply me at your earliest convenience .

Best Regards !

Raspberry Pi Video Course

Posted on

Extraterrestrial life

Are we alone in this universe, this is a popular question mankind struggling to answer throughout the history. But still we could not find exact answer yet. From the start of space exploration, we are trying to find possibilities of life in our solar system and outside universe. According to current data there is no any possibility of intelligent life in our solar system. but there is some possibility of primary life in some places in solar system like Jupiter or Saturn moons. Also there is a possibility of life in some outside solar systems recently found.

Scientists believe, to form a life there should be following ingredients.

  1. Liquid water
  2. Energy source
  3. Biological elements
  4. Molecules

There are few places in our solar system which contains some of above ingredients.

Mars

NASA’s Hubble Space picture of Mars

Mars having huge interest on finding life. But still there is no any good evidence to support. Due to its habitable zone and similarities to earth there are lot of investigations to find life on mars via telescopes and remote probes. There are lot of evidence shows mars had liquid water in past. Up to date scientists believed there is no liquid water in mars. But recent discovery found there can be a subsurface lake in mars. Currently primary objective of mars exploration is finding traces of past life.

Europa

surface of Jupiter’s icy moon Europa .NASA

Europa is a one of the four major moons of Jupiter.it is covered with ice layer.  Scientists believe there is a subsurface ocean exists below the surface ice cap. In that case there may be environment for life. Because of this Europa is identified as one of the major locations in solar system for life. There are many science fictions talking about life in Europa including space odysy by Arther c clerk

Titan

Titan With Saturn. NASA

Titan is the largest moon of Saturn. Which is having lakes and revers of Methane. And also, thick atmosphere with carbon compounds. Scientists believe this environment is good for start of life. If life exists on Titan it may completely different than earth life because those life is based on liquid methane, but earth it is liquid water.

Enceladus

Enceladus. NASA

Enceladus is a moon of Saturn which is covered by ice. According to observations of Casini space craft there are some geyser like water vapor jets in polar region. Scientists believe there can be liquid ocean under the ice cap of moon and it can support some sort of life.

Venus

Venus. NASA

Venus is the second planet of solar system. For the long time it is believe that there is no possibility of life due to it is extreme conditions. With high temperature and pressure the surface of planet cannot support life. But recent study suggest there can be some sort of life exists in higher atmosphere. If there is a life in Venus those can be most probably consist of floating microbes.

Other places which there is a small possibility of life are

  • Ganymede and Callisto Jupiter moons
  • Triton Moon of Neptune
  • Pluto
  • Mimas Saturn moon

Extrasolar planets

The sun and our solar system in relation to the Milky Way galaxy. The white circle indicates the area where the majority of exoplanets have been found with current telescopes. Credit: NASA/JPL-Caltech/T. Pyle

Scientists now continue searching for life in other solar systems. Finding planets in habitable zones of stars.  

NASA mission using Kepler telescope helped to find thousands of exoplanets. Most of them are in habitable zone. Even though those exoplanets are found the distance to those planets become it is difficult to explore them. For example, nearest exoplanet is Proxima Centauri b which is in 4 light year away. With currant technology travel this distance will take centuries.

Proxima Centauri B location. https://palereddot.org/

Limitations in Extraterrestrial life

Astrophysicist Frank Drake has developed formula to calculate number of alien civilizations in our galaxy which can communicate with us. According to it there are more than 10,000 civilizations in this galaxy. But it is problematic that still we did not come across any sign of other civilization.

A revised version of the Drake equation, a mathematical formula for the probability of finding life or advanced civilizations in the universe.
Drake equation. NASA

Number of projects attempt to find any radio wave telecast from other civilizations including SETI. Decades of search not found any trace up to date. 

Some scientists believe earth is the only home for life. According to them Life is a very rare incident in this universe. Fermi paradox is popular theory in this philosophy. Which is developed by physicist Enrico Fermi, according to this theory even though there are some intelligent life in universe but meeting them is impossible due to life of universe and distance between those planets and earth.  Those intelligent civilizations may already destroyed before us. Or they may have already visited the earth before us. According to Firmi paradox there may be some filters which prevent intelligent  life to become advance civilization. For humans we may already passed this Great filter or it is ahead of us. In both cases there is lesser possibility of meeting with other civilizations. Because if it is ahead of us means we will destroy before that. If we have already passed it means other civilizations may destroyed already.

Also there is a possibility that alien life exists but we are not able to recognize. The life as we know is based on carbon. The carbon-based life in our planet is evolved during 4 billions of years. We cannot expect it will happen same way in other planets. There may be some sort of life in universe which is not recognizable to our senses or even the tools developed by us.

Even In earth there are life found some extreme conditions which we believe no life can support.

When we look into night sky, we see millions of stars. Same way other aliens from one of those stars also may looking and asking the same question as us. That is the nature of universe, we may miss our cosmic friends by time and distance.

Posted on

How Nikola Tesla drove a Car using the Radio Signals?

Dr. Nikola Tesla is known to be the “King” for Free Energy Devices. According to his Biography he was a very abnormal, extraordinary person and always needed to invent something new for the World. From his early childhood he showed a keen interest in the field of Electronics and had followed many Courses related to the field. But his Teachers has mentioned him as a mad person because he has introduced new methods to create Electricity free of charge without any external power input.

In that era, it was a completely impossible fact to produce Electricity without any substantial power input like the Hydro Power with Turbines, Wind Power with Dynamos e.t.c. But Nikola Tesla clearly indicated that, there is a specific way to produce Electricity without any external power input. He did many experiments to create Electricity without any external Power Input and ultimately he was successful in creating a Device which utilized the Electrons exist in the Earth and Sky. There is a specific way to capture such Electrons and convert them to the Electricity. Initially many People condemned hid Device but he was able to power up many Household Equipment using  that  device .

A simple circuit Diagram of his Device is as follows.

As I mentioned above, the Electrons existing in the sky is captured by the Insulated Shiny Metal Plate and the Electrons from the Earth is captured from the Earth terminal. Then a small voltage is available in the output terminals with the High Quality Capacitor connected in parallel and that small voltage is increased to a higher amount by the step up Transformer. The oscillator is used to provide a pulsed voltage supply to the primary coil of the Transformer to enable a high voltage output in the Secondary coil which could be connected to a Load.

According to the explanations of recent Scientists, this is a working Device and one Experimenter has been able to power up a House using an improved design of this device. I speculate that connecting these multiple devices in the parallel mode will simultaneously    increase both the Amperage and the Voltage thus enabling a way to power up a House. However Dr. Nikola Tesla became much famous for inventing this new method to capture the existing Electrons in the Environment to produce Electricity.

Dr. Nikola Tesla was able to drive a Car using the Radio Signals without a drop of Fuel as normally consumed by the car Engine. He completely removed the Car Engine and fixed an 80HP Motor to the clutch shaft and drove the car for one week using the Radio Signals. Directly you can say this is absolutely an impossible fact, but according to the documentary evidence, Dr. Nikola Tesla had truly driven a Car using the Radio Signals.

He had captured the weak Radio Signals   using two Antennas and then amplified the signals using an Amplifier. The Transistors were not available on those days and only Radio Values were in use to create Amplifiers. He had used multiple number of such Values to amplify that weak Radio Signals to a Higher Voltage by which 80HP AC Motor could be run.

Nikola Tesla had also suggested a Plan to run UFO s using this same method but the Government had rejected his plans.

I suggest , we can use this Nikola Teslas’s Wireless Energy System even today to the Transportation System . It is much easy and economical.

“ ENERGY ALWAYS EXSITSIS  IN OUR ENVIRONMENT. WE SHOULD FIND SPECIFIC WAYS TO CAPTURE IT FOR OUR DAY TO DAY USE”

Posted on

Low Drag Generator using a Mechanical Controller

This method is used to stop lowering the Generator Speed when connecting a Load to it. This is done by using a Mechanical Controller attached to the Rotating Shaft of the Generator.  Here at first the Capacitor is charged by the Generator and the Load is completely disconnected from the Generator.

The Firing Section has reached the Non Firing Section now because of the Rotation of the Controller attached to the Generator Shaft. Here the Load is connected to the Capacitor and both the Capacitor and the Load is completely disconnected from the Generator. The Capacitor Discharge is sent to the Load.

So the overall outcome of this method is not to affect the Generator Rotation Speed when the Load is connected to it. If you use the normal method of connecting the Load directly to the Generator then the Rotation Speed of the Generator will definitely get lower and the Generator efficiency goes down. 

In order to get more efficient results, we have to use a high frequency mechanical controller designed as follows. Here, the Capacitor will be charged and discharged to the Load 3 times more than the above design.

Posted on

How to reduce your Body Weight?

The Health is Wealth and no other Wealth is better than Health. Therefore we should be engaged in good work practices and avoid ill health as much as possible. The over weight in the Human Body in other words the “Obesity” has become a major health problem in the present society. According to the Reports of the World Health Organization (WHO) 20 % of people in the World are suffering from the Obesity.  Many people do not take much care about this problem and ultimately they would have to undergo a hardship to face the intolerable problems caused by this obesity problem. The Body Mass Index (BMI) is a calculation used to determine your body fat. In some cases it can help a Doctor to determine your overall fitness and your risk of developing a chronic disease. Keeping the BMI in normal position plays a key role in maintaining your Body Weight in a normal position.

What causes the Body Over-Weight?

A number of factors can play a role in weight gain. These include Diet, Lack of Exercises, factors in a person’s environment and genetics.

Diet (Food and Activity )

The weight gain is predominantly based on the foods we take. People get much weight when they consume more calories than they burn through activity. This imbalance causes the weight gain in the human body and many people do not take much care about this matter and they take much more calories than burned, due to lack of exercises.  Day by day these excessive calories start to be stored in the Body causing the over –weight having an abnormal BMI rate .

Lack of Exercises.

Lack of Exercises also plays an important role in the obesity. The calories we take should be burned in a balanced way and if not such calories would be stored in our body causing the Obesity. In the modern world many people do not have much time to do some regular exercises due to their busy schedule . But the outcome is very dangerous as the Obesity can cause even chronic heart diseases which can even bring the Death to some people. So people should allocate some time for regular exercises despite the fact that they have busy schedule. If people are ill fated the will be unable to fulfill their busy schedule as unhealthy people are unable to work hard. So the People should be enlightened the importance of regular exercises.

Environment

The environment around us influences the possibility to maintain a healthy weight. The following factors explain the effects of environmental problems which cause the weight abnormalities.

  1. Lack of having sufficient area parks, sidewalks and affordable Gyms makes it hard for people to be physically active.
  • Over-sized and packed artificial foods contain an excessive amount of calorie which instantly increase the weight of the Human Body , even if the people are involved in regular exercises.
  • Due to the financial constraints of the People , many of them are unable to purchase some fresh fruits and vegetables which are essential to keep a good BMI.
  • The people are always encouraged to buy unhealthy foods by the advertisements by which they tend to purchase high-fat snacks and sugary drinks which are much unhealthy and hazardous to the human body.   

Genetics.

According to the recent researches of WHO (World Health Organization) the Genetics play a significant role in obesity. The Genetics can directly cause Obesity in such disorders as Prader-willi –syndrome. According to the scientists the Genetics may increase a person’s likelihood of becoming obese but regular exercise and control of food intake can assist the person to reach a normal BMI with the proper path paying of the Medical Professionals.

The Importance of keeping a normal Body Weight .

Many people are usually unaware of the importance of keeping their body weight in a normal position. As I mentioned at the beginning the BMI is the main measurement the Doctors use to determine one’s body weight. Theoretically , if you are in normal Body Weight your BMI rate should be between 18.5 and 24.9. If your BMI is below 18.5 then you should be underweight and if it is above 24.9 then you are suffering from obesity.

Keeping a normal body weight allows us to be much active and efficient in our day to day life span. It also allows the Breathing much easier and also increases the Testosterone Level in the Human Body which affects the sexuality.  Keeping a good Body Weight also protects us from the chronic heart diseases and diabetics. Today we can see many people are suffering from the chronic heart diseases and diabetics for which the Obesity plays a vital role. A recent research has indicated that the People who are suffering from obesity usually get bad tempered than people who have a normal weight. Also the obesity causes sleeping problems to people .

Important Methods  reduce your Body Weight

Method  1 – Reducing your Body Fat with Dietary Changes .

The basic way to reduce the Body Fat is taking some low calorie diets . Monitor how many calories you consume on a daily basis and reduce it by  500 calories each day. This method will result in 1 –  2 pound weight loss per week. But do not try to follow a very lowest calorie diet below 1200 calories because when your calories are too low it may be harmful for your normal weight.   

Method 2 – Reducing Body Fat by Regular Exercises .

Regular exercises is very essential to keep a good normal body weight. It will also stimulate the Blood Circulation by which we can prevent Heart Diseases. The Doctors usually approve a one Hour daily exercise which is much beneficial for the Human Body. Those who are unable to go to a Gym can do regular walking and cycling on a daily basis which is much beneficial for the Human Body.

Method 3 – Consume more fresh Fruits and Vegetables .

Consuming more Fresh Fruits and Vegetables is much essential to reduce the Body Weight.

  • It’s generally recommended to consume about five to nine servings of fruits and vegetables each day. Aim for one to two servings of fruit and the rest should be vegetables.[7]
    • Also, when you’re choosing foods from these groups, try to choose items that are brightly colored or darkly colored. These foods are typically more nutrient-dense meaning they contain higher amounts of vitamins, minerals and antioxidants.[8] For example, choose kale over iceberg lettuce.
    • Try using vegetables creatively. Try them raw with a dip or in a salad, sauté them on the stove, cook them in a soup, roast them in the oven, grill them outside, or hide them in a smoothie or in spaghetti sauce and serve over spaghetti squash.

In conclusion, I would like to mention that keeping a good body weight is very essential to live a Healthy Life and actively. I urge the relevant Authorities concerned to conduct some awareness Programmes to the General Public on the importance of keeping their BMI rate in the normal position. Otherwise we can see a world full of Patients suffering from Obesity.

Posted on

How to prevent Cardiovascular Disease?

Robina Weermeijer

What is “Cardiovascular Disease”?

Cardiovascular Disease(CAD) is a kind of Heart Disease which is commonly suffered by many People in the World. Mainly the Heart and the Blood Vessels are the mostly affected human body parts by this Disease. This is a very dangerous disease which brings death to the Human Body if not properly medicated well. CAD gives the Human Body early signs but some people ignore them due to their negligence. But we are unable to say when will this Disease bring us a sudden death as the Heart is the most sensitive  part of the Human Body and an tiny malfunction of it would bring the Death to us.

“Prevention is better than Cure”   is a famous statement in the Health Care Field. We should always remain vigilant about our Health and should take every opportunity available to prevent our Body from the Diseases. Curing Heart Diseases just like CAD is not an easy work for the Health Care Professionals as it takes much time and continuous medication most probably in whole life time. Despite the fact that the Health Care Sector has been modernized with newly introduced Laboratory facilities and new kind of medications to cure the  Heart Diseases still it is  completely a  hard work, according to the Health Care Professionals. Even if the “Preventing is better than  cure “ is an old statement , it is still a worthy Statement most relevant to the present society. So we should always urge the necessity to prevent our Human Body from the Diseases by being involved in the preventive measures prescribed by the Health Care Professionals.

There are many types of Cardiovascular Diseases (CAD)

  1.  Coronary Artery Diseases ( CAD) , commonly known as Heart Attack.
  2. Hypertensive Heart Disease
  3. Rheumatic Heart Disease
  4. Cardiomyopathy
  5. Heart Arrhyhmia
  6. Congenital Heart Disease
  7. Valyular Heart Disease

Are some of them. But if we are always involved in preventive methods we will be able to overcome all the above mentioned diseases and it is a well proven fact by the Health Care Professionals.

The Early Signs of the Cardiovascular Disease .

There are many  early signs for a considerable number of mostly prevalent diseases among the people except sudden diseases occurred by accidents and  committing suicide attempts. Due to the negligence and the ignorance of people, these early signs are vanished down and a sudden start of a disease only warns people about the risk of diseases like CAD. So we should always take into our consideration that the early signs of a disease should not be ignored or neglected and a consultation of a Doctor is much compulsory to prevent the disease which would otherwise bring a sudden death to people unexpectedly.

The modern Health Care Experts indicate that the all Heart Problems do not occur with clear early signs. The main reason for  this is that some Heart Symptoms do not even happen in your Heart and it is not always easy to tell what is going on.

But following are the most common Early Signs of “ Cardiovascular Disease”

  1. Chest Discomfort.

This is a most common sign in a Heart Failure. If your Heart is not in normal functional state , you will always feel pain, tightness, or some pressure in your chest. But this chest discomfort varies from person to person and it would be intolerable for some people and a nothing but a small pain for some other people.

  • Nausea, Indigestion, Heartburn, or Stomach Pain.

The above signs may also be the early signs of a Heart Attack. Even the vomiting will be occurred under these circumstances. According to the Heart Specialists the women are more likely to be having these types of  symptoms than men,

The stomach Pains are usually happened due to the improper intake of  meals we eat but there is a firm connection between the Stomach Pains and Heart. If you have a stomach pain with the other signs mentioned above it is much better to consult a Doctor as soon as possible.

  • You feel Dizzy or Lightheaded.

If you loss your balance or feel faint for a moment it is likely that your blood pressure has dropped down because your heart is not able to pump sufficient blood than it should be. Most commonly we can have a sudden unsteady status with a chest discomfort with this sign and it clearly shows the malfunctioning of the Heart.

  • Throat or Jaw pain.

The Throat or Jaw pain is probably not connected to any sort of Heart Disease. Usually it is caused by a cold, sinus problem or by a muscular issue.

But the center of your chest is paining with much pressure and spreads up into your throat or jaw, most probably it could be a sign of a Heart Attack.

  • You get exhausted easily.

Extreme exhaustion or unexplained weakness are also some early signs of a Cardiovascular Disease. You will feel suddenly fatigued or winded after doing something, which you had no problem in the past. These are very clear signs of a cardiovascular disease and the a consultation of a Heart Specialist should be done immediately.

      6     Snoring

             It is normal to Snore a little while you snooze but unusually loud snoring can be a sign of sleep apnea. If you stop breathing for brief moments several times while you are still sleeping puts extra stress on your Heart.

   7  Sweating

       Another early warning of a Heart Disease is the Sweating unusually without no obvious heavy work or reason. According to the Heart Specialists this happens because of the malfunctioning of the Heart and the person gets quickly tired because of the less blood circulation to the vessels.

 8 A Cough that Won’t Quit.

Many of think that the Coughing do not have a firm relationship with the Heart Diseases. But if you have a continuous Cough that produces a white or pink mucus it is a sign of a Heart Failure. The reason for this is the Heart can’t keep up with the Body demand causing blood to leak back into lungs.

9 Legs Feet and Ankles are Swollen,

This sign indicated that your Heart doesn’t pump blood as effectively as it should. This causes Bloating as the Heart can’t pump blood fast and blood backs up in the veins.

10 Irregular Heart Beat.

If your Heart is beating out of time for more than just a few seconds , or if it happens often, then it would also be a sign a Heart Failure. But it is normal for your Heart to race when you are nervous or excited oe to skip or add a beat once in a while.

Reasons for Cardiovascular Diseases.

There are many reasons for Cardiovascular Diseases. Some of these reasons are caused by our busy day to day Schedule , Stress in the working place and due to lack of regular exercises. In the modernized world People are always running in a competitive race to earn much more money. Then there is no time for them to do regular exercises by which we can prevent not only the Cardiovascular Diseases but also other diseases like Diabetics, Cholesterol and so on.

The Dietary intake plays a significant role in the Heart Diseases. If meals full of cholesterol, for instance Meat, Fried Instant Meals like Rolls, Cutlets, and  Alcohol and Tobacco  increase the possibility of the tendency for Heart Diseases.

Genetics is also a cause for Cardiovascular Diseases. Heart Problems in a person’s parents increase the risk in 3 folds. According to the recent Researches women are more likely to be suffering from Cardiovascular Diseases than men on the basis of Genetics. Another commonly known reasons for this cardiovascular diseases can be mentioned as Age, Sex, Air Pollution , Depression and traumatic stress , sleep disorders and occupational exposure to unhealthy conditions.

How to prevent Cardiovascular Diseases.

As I mentioned at the beginning of this Article “The Prevention is better than cure”. So we should take all the precautionary steps to prevent ourselves from these Cardiovascular Diseases which could bring us Death at an unexpected moment.

Regular Exercises play a vital role in preventing cardiovascular diseases. When we do exercises our Blood Circulation is done in a very stimulate manner and the blood starts to flow across the blood vessels with much high pressure  so that if some cholesterol is positioned on the Blood Vessels they are vanished up. Then our Heart is able to pump blood easily and there is no pressure for the Heart distribute blood all over the Body. So there will be no any sort of Cardiovascular diseases to you, if you continue to do some regular exercises.

We should always pay our meticulous attention to the meals we consume which directly affect the tendency of Cardiovascular Diseases. We must consume fresh fruits and  vegetables and  avoid eating cholesterol filled meals  like meat and fried food.

The Health is Wealth so we have to be in  happy and contended working environments and avoid stressful occupational exposure to prevent ourselves from the Cardiovascular Diseases. In conclusion, I urge the relevant Health Care Organizations to come forward without delay to conduct some Awareness Programmes to the General Public on the importance of preventing the Cardiovascular Diseases. Our sole objective is to create a Healthy Future Generation who would work for the entire development and progress of our County. To fulfill this ambition we should work collaboratively with each other with real commitment.

Posted on

Really working Free Energy Device.

Creating a Free Energy Device has become a dream of many People Today. Actually , it was also a Dream of a famous Scientist  Dr. Nikola Tesla some decades ago. Many people are against the fact “Free Energy “ and they always argue that an Energy cannot be created and it is against the laws of Physics.  Dr. Nikola Tesla did so many experiments to create a Free Energy Device in a past era where no electronic components were available as these days. But because of his great dedication and enthusiasm, he succeeded in creating many Free Energy Devices and other invaluable inventions like the Alternative Energy, Alternator, and the Permanent Magnet Motor which are hardly used to fulfill our day to day activities today. He is also the Inventor of the Wireless Energy and transferring that Energy through the Waves. Today we use the Radio, Television and the Mobile Phones because of his remarkable inventions.

Today, I am going to introduce you a Really Working Free Energy Device, and it is very simple and no higher knowledge of Electronic Science is required to create it. Also it needs very less components and they are as follows.

  1. 12V DC Permanent Magnet Motor 1100 R.P.M. 1/12 h.p
  2. 12V 12A Rechargeable Motor Cycle Battery
  3. Controller  made of Copper Circle ( explained later )
  4. Fly Wheel (Mass)
  5. Energizer made  of Magnets and Coils (explained later )

As a person involved in many Free Energy Experimentation work , I realized that a Battery cannot be charged, while getting a continuous load from it. Imagine we connect a Motor to a battery and keep it running foe some hours. The Battery will get discharged and the Motor will stop. But one might think that if we connect a Generator to the Motor shaft and connect the output terminals of the Generator to the Battery then this device will run indefinitely for many days without discharging the Battery, because the Battery is being recharged by the Generator. BUT IT IS NOW DONE AND THE BATTERY WILL GET DISCHARGED AS EARLIER.

The reason for this that we are unable to charge a Battery while getting a continuous output from it. Today Electric Vehicles are very famous among people. But the disadvantage of such Electric Vehicles is that we have to charge the Drive Battery for about one hour when it gets discharged. If a Battery can be charged, while getting a continuous output from it , then we can fix four electric dynamos to the four wheels of the vehicle and charge the Drive Battery while the vehicle is running. BUT IT IS COMPLETELY IMPOSSIBLE AS A BATTERY CANNOT BE CHARGED WHILE GETTING A CONTINOUS OUTPUT FROM IT.    Otherwise the Electrical Engineers who involved in the Electric Vehicle manufacturing could use this way to self-charge the Drive Battery while running the Vehicle so that there will be no need to spend hours of time in the Battery Charging Centres. 

Famous Scientist called John Bedini from UK ultimately found a way to self-charge a Battery while getting a continuous Load from it. He did many experiments on this matter and in the year 1984 he was able to demonstrate a Really working Free Energy Device which self-charged its drive battery while running the Device. His device ran indefinitely for many days without discharging the Drive Battery he was even awarded uk patens for his invention.

This invention is not much complicated and it has only few electronic components mentioned above. Following is the Diagram for this Device and the people who have a little knowledge about the Electronic Science could create it easily. But it is really working and it has been proved by many Scientists today who replicated it successfully.

N.B. Please note that all thsese Diagrams were extracted by the John Bedini Web Site.

The Basic Diagram for the Device

As explained in the above Diagram there are very few Components in the Device and this has been proved to be a really working Free Energy Device. The basic concept of this Device is charging the Battery while not getting any load from it. Just like removing a discharged Car Battery from the Vehicle and connect it to a conventional charger for charging.

In this device this concept is fulfilled by the “Controller” made of copper ring and the copper brushers. This is similar to the “Communicator” of a conventional Permanent Magnet Motor but has some changes in the Brush system. This controller allows the Drive Motor to get connected to the Battery for some time and disconnect it in the same time intervals. If the motor shaft is not connected to the “Mass” as shown in the above Diagram then it will not run. But as the Motor shaft is connected to the Fly Wheel the speed of the Motor will be increased step by step because of the Fly Wheel as it stores some moving energy, despite the fact we supply a trigger voltage (ON-OFF)  to the Motor through the Controller.  So the Fly Wheel helps the Motor to run continuously while increasing the Speed.

The Energizer is also connected to a one Brush of the Controller and when the Motor is completely disconnected by the Controller, the Energizer is connected to the Battery and it will charge the Battery well. . This is how we fulfill the concept of this device “charging the Battery while not getting any Load from it”  . The Energizer is a device which is fixed to this Device producing DC voltage required to charge the Battery. It is made of six Neodymium Magnets and Six Generator Coils connected in serial mode. So the Controller connects the Energizer to the Battery when the Motor is disconnected from the Battery and do vice versa. This method is continued and the Battery is self-charged well, while the device running. So this Device is running indefinitely without discharging the Battery. 

The Diagram of the Controller is as follows.

You can clearly see this Controller disconnects the Motor from the Battery and connect the Battery to the Energizer and do the vice versa when the Device is running.

Pulsing system of the Device

The pulsing system plays a significant role in this Device. The time period taken to connect the Motor with the Battery and the Energizer with the Battery should be equal. This can be accomplished if you create the “Controller “ well and as shown in the above Diagrams. When you fix the three Bushes please make sure that they are fixed with 90 degree alignment between each other.

Copper Section

  Also the copper section which touches the Brushes should be less than 180 degrees.

If smooth type controller is made then the following  pulses will be shown in an oscilloscope.

However it is advisable to check the pulses by an oscilloscope when the Device is running as it is a must to have the above pulses for efficient Battery Charging.

So you have been enlightened about all vital information about this Free Energy Device , I would like to add a full circuit diagram with the Energizer which charges the Battery.

There are 6 Neodymium Magnets fixed in the Rotor all North pole facing up and also there six generator coils connected in serial.  Please add rectifiers to covert the AC voltage supplied by the Generator to DC voltage to be able to charge the Battery.

This has been proved to be many Scientists who replicated it and also by ordinary People who have a little knowledge about the Electronic Science.

I also suggest you to create this Device and this is not an Internet Scam as many well experienced Scientists approve this to be really working. The Battery is being charged by the same Device and this can be used for some Household work like lighting Bulbs , charging the Laptop Battery e.t.c . However I recommend to connect a dynamo or Alternator to the main shaft of this device and then connect the Load to it. It is much good for the Drive Battery and then the Device will run much efficiently without affecting the Battery voltage by the Load.

Please note that I will not be responsible for any damages caused by the experimental work of this Device. You must assure your Safety and Accuracy.

Best of luck to the new Replicators!!!.   

Posted on

Free Energy and Renewable Energy Projects .

unsplash-logoGustavo Quepón

Experimenting the Free Energy and Renewable Energy has become much popular in these days. When considered about the “Free Energy “ one may think and argive that we can’t create an Energy and it violates the laws of Physics. It is correct, but “A Free Energy Device “ does not mean a machine that provides its own Energy” .  For instance, if we take a “Magnetic Free Energy Generator “ it provides us some Energy by utilizing the Energy stored in the Magnets. If we strategically assemble the Magnets in a Magnet Rotor according to some legitimate calculations , we are able to convert the Energy stored in the Magnets to Rotational Energy by which we can produce Electricity through the Electromagnetism.

If we take a Battery, it converts the Chemical Energy to Electric Energy. If we connect a Load to a Battery, For Instance a Motor or a Light Bulb, the Battery will start to be discharged after two or three hours depending on the efficiency of the Battery. But have you ever thought a way to keep the Battery charged while taking a continuous load from it?. If we think scientifically there is a way for it and it is also a concept of the Free Energy System.

Dr. Nikola Tesla can be described as the Father of the “Free Energy and Renewable Energy” System. According to his inventions the Electricity exists anywhere around us and we have to use a systematic  and scientific way to obtain Energy from it. At the start of his scientific career, He was able to create a Free Energy Generator which produced Electricity utilizing the Electrons exist  in the Sky and Ground. He said, “There is a huge voltage Gap”  between the Sky and the Floor. The “Lightening” is the best example to prove that. Later he was able to build a Tesla Tower which could produce sufficient Electricity required to power up a House. He is also famous for inventing the Alternative Current and the Alternator. It was an amazing fact that once he was able to drive a car using a Motor which ran by the power of Radio Waves without any external power source.

All of us still depend on the Hydropower Electricity. But think about a situation where there is a huge drought, or more days of repair in the system, by which the Electricity supply is interrupted for many days. When such unexpected situation happens all our day to day activities which required the Electricity have to be abandoned. So many Scientists think about this Problem and did years of experiments to make a Free Energy Device which provides continuous Power.

John Bedini Free Energy Device .

Mr. John Bedini in UK got much famous for creating a “Free Energy Device “ with much less components and a simple circuit diagram. The basic concept of the John Bedini Free Energy Device is giving an Electricity to a coil which includes many turns of copper wire and stopping the Electricity supply quickly. In scientific words “Triggering a Coil “ with Electricity supply. If we do this continuously there will be a huge voltage spike produced by the coils and we can use that voltage spike to charge a Battery . As this voltage spike is very strong we can also get a separate voltage supply while charging a Battery. So if we use two Batteries one for driving the Bedini Motor and one for charging we can get a continuous supply by swapping the Batteries. That means when the Drive Battery gets discharged, we can put the charged Battery to the Drive Battery position and the Drive Battery to the Charge Battery position. We can continue this method to get a continuous Electricity Supply. Also we can connect an Inverter to the Charging Battery and use the Bedini Motor to power up a House.

According to the Scientist Mr. John Bedini, if someone can make an efficient Bedini Motor with super Neodymium Magnets and efficient Bifilar coil system, that Device is entirely able to power up a House without discharging  both the drive and charge Batteries.

The Basic Circuit Diagram of the John Bedini Free Energy Device is as follows.

P.T.O.

The famous Scientist Mr. John Bedini also introduced a really working Free Energy Device with 03 Battery Swapping System. The basic concept of this Device is swapping the Batteries continuously without any manual handling. This is very important concept and this Device has been practically tested to be a really working Free Energy Device.

The diagram for John Bedini 3 Battery Swapping system is as follows.

Magnetic Piston Engine

Another Inventor from UK has successfully invented a Magnetic Piston Engine which runs indefinitely without any external power source. It uses only the Energy stored in the Magnets. The Inventor has announced that this Engine can be used to the Vehicles and practically it has been tested.

The Basic Diagram for the Magnetic Piston Engine is shown Below.

If you need some more comprehensive information about this Magnet Piston Engine please refer to the PDF  by the following link.

http://www.ijmerr.com/v3n1/ijmerr_v3n1_8.pdf

In conclusion, I have to mention that the Free Energy and the Renewable Energy is not a myth. If work with much intelligence and confidence , we are able to tap it easily.

Posted on

How to be a good Social Worker.

In the present Society, we can see that a considerable number of People are engaged in the Social Service. The main objective of the Social Service is to assist the poor and disabled People who are helpless and seeking the kind support of the donors.

Establishments of Social Services Organizations are rapidly growing these days. But the sole Objectives of the Social Workers attached to such Social Services Organizations are different from person to person. Some Worker’s main objective is to earn Money and become affluent by sending false project proposals to the Donors and they utilize the funds for their private expenses instead of helping and supporting the poor people as expected by the Donors. Some Social Workers do their work only to get the Salary and that sort of Social Workers usually do not have a real emotional feeling towards the poor and disabled people who are helpless. There is also some other category of social Workers whom can be found very rarely . They inherently, have an attitude of assisting the helpless poor people , without thinking about their private profit. Sometimes they spend their own Money for the beneficial of helpless poor people . According to my speculation that sort of social workers are the best and most suitable Employees for a Social Services Organization.  

As I have mentioned above inherently we should have some sort of kind attitudes with us to  be a good social worker. These attitudes may include feelings just like always thinking of others’ hungriness,  sadness , and helplessness and trying find every opportunity to help them even by spending one’s own money to solve the problems of such helpless people. .This sort of inherent attitudes can be found very rarely among the People but such kind attitudes could be gained by the other Social Workers, if they are given proper Awareness Programmes, which plays a vital role in the Social Services Organizations.

These Awareness Programmes should enlighten the Social Workers that their main responsibility is to assist the helpless poor people instead of putting the money given by the Donors to their pockets. If they utilize the funds for their private purposes, they will never be able to be  happy and contended as all of we are bound to the fact that “ Every Action has a Reaction”.

The Donor should also implement a systematic programme to ascertain whether the funds they send to the Social Services Organizations are utilized  regularly to assist the poor and disabled , helpless people. For instance, there should be regular checking by an authorized officer from the Donor’s side to see whether the funds are utilized well only for the beneficial of the helpless poor people instead of filling the pockets of Social Workers.

In conclusion, I would like to mention that the real good Social Worker should inherently possess kind attitudes to help helpless people and if not relevant Awareness Programmes should be conducted by the Authorized Officers to propagate such attitudes among the Social Workers. A good Social Worker should always have an Idea of helping the helpless people even by spending his/her own Money. If a Social Worker tends to utilize the funds for their private purposes illegally, He or She would definitely be punished by the fact that “Every Action Has a Reaction”.

Posted on

How Modernized Innovations affect our Health

The World is developing tremendously with many modernized innovations. Some of these Innovations are good and beneficial for human life while some other innovations are hazardous. However the  Life has become much easier and more comfortable than earlier and at the same time the cost of living has been increased significantly.

According to the Annual Reports of the World Health Organization (WHO) the Health of the People is drastically reaching to a hazardous position, for which meticulous attention should be paid. The modernized innovations have made our lives easy while producing some hazardous effects to our lives too.. For instance , if we think about the modern IT Technology, it has become a vital component of our day to day lives. We can obtain a vast amount of information through the Internet very easily and conveniently. But there are many sort of bad effects too. The Children specially  teenagers tend to watch Pornography films which exhibit the Nudity. This sort of Children are likely to be suffering from Sadism and the final act is producing a Future Generation who are abnormally suffering from extreme sadism and involved in criminal sexuality. Many Parents have a   habit of gifting a Computer with the Internet Facility to their Children with the sole objective of uplifting their Education. But most of these Parents are unaware of bad consequences of this Technology. Also these Children get addicted to the Computer Video Games, so that they neglect the studies and most of them fail their term exams. Ultimately most of these Children are likely to be suffering from Psychological disorders for which parents have to seek the support of Psychiatrists. See how the modernized innovations affect our lives with much bad consequences !!!.

So considering the above facts, we can ascertain that the modernized innovations could be harmful to the Human Health. Another fact is that most parents are suffering from a Rat Race to enroll their Children to the High Schools which provide some modernized innovations to the School Children. These Parents usually have two ambitions. One is improving the education level of the children and other is the proudness and reputation which is mostly desired by the Parents. But the innocent Children face a lot of inconvenience and stress at the so called high schools and sometimes they are unable to perform wel

l in studies due to their mental condition. Even if the so called high schools are well equipped with many modernized innovations it would indirectly affect the Health and well being of the School Children.

So considering all the above facts we can come to a conclusion that, the People have to take some medications for the psychological disorders caused by the modernized innovations. We urgently have to find a timely solution to this problem and otherwise we can see an ill-fated future generation, who will be unable to lead a Healthy Life without medications. At first, I have to say that, we must take some precautionary steps to the utilization of modernized innovations while paying the meticulous attention on how to utilize it for our benefit. When consider about the IT Technology, we should use it for the important work, instead of using it for the bad things like pornographic films. The Parents should also remain vigilant about the usage of computer by their children and should advise them to use the computers for the educational purposes only.

However I do not mean that we should completely eliminate the modernized innovations , but we should use them for the improvement and convenience of our lives in a systematic manner. The Human Body needs relax and contentment to be Healthy and also the intake of fresh fruits and vegetable keeps the human body much healthy. The Blender is a modern equipment introduced for mixing the fruits and vegetable conveniently. But according to the recent Researches when we blender the fruits and vegetables the nutritious level of them gets much low. So the better thing is mixing them naturally as done our grandparents who lived in an ear where Blenders were not available.

In conclusion, I would like to urge the relevant Authorities to take necessary actions to conduct some awareness programmes for the General Public on how to use the modernized innovations for a Healthy Life without affecting the normality of the Humans .